A Step-by-Step Guide to Installing a New Toilet
Are you looking to upgrade your bathroom with a new toilet? Installing a toilet is not as complicated as it may seem. This article is here to help take you through the process step-by-step. With just a few basic tools and helpful tips, you’ll be on your way to installing a brand new toilet in your home and enjoying its benefits in no time. Follow this guide for an easier and more efficient experience as you upgrade your bathroom with a new toilet.
Preparation: Tools and Supplies Needed
Before you start the installation of your new toilet, it’s important to make sure you have all the necessary tools and supplies ready to go. To successfully install your new toilet, you will need a level, adjustable wrench, screwdriver, adjustable pliers, hacksaw, wax ring, and mounting bolts. You will also need an adjustable wrench, toilet seat and bolts, screws, and other mounting hardware. You should also make sure you have a putty knife and a caulking gun on hand, as well as a plumber’s tape, a brush, and a vacuum.
It’s also helpful to have a few extra materials on hand in case you need them. These items include a bucket or container for storing any waste that may occur during the installation process. You may also need to pick up a supply line, shut off valve, and any extra supplies you may need to make sure the toilet is securely installed. Having these extra materials on hand before you start the installation process can save you time and energy.
Installing the Toilet: Step-by-Step Guide
The first step in installing a new toilet is to measure the space. Measure from the wall to the center of the bolts that held your old toilet in place. This will give you an idea of the size of the new toilet that you need. Make sure that you have enough room to fit the new toilet as well as any other fixtures you may need.
The next step is to turn off the water supply to the toilet. This can normally be found behind the toilet. You’ll need to turn off the valve and remove the old toilet. Disconnect any water lines and bolts to remove the old toilet. Make sure to inspect the flange for any damage or corrosion.
Once the old toilet is removed, it’s time to install the new toilet. Place the new toilet onto the flange and secure it using the bolts. Make sure the toilet is level before continuing. After the toilet is secure, attach the water supply line. Turn the water supply line back on and flush the toilet to check for any leaks. If all is good, it’s time to attach the toilet seat, wax ring, and caps.
Once all parts are connected, you’re finished! It’s as simple as that. With the help of this guide, you should now be able to install a new toilet with ease. Enjoy your new bathroom upgrade and make sure to keep the tips in mind for any future toilet installation.
Finishing Touches: Sealing, Connecting Water Supply, and Testing
Next, you must finish your new toilet installation with sealing, connecting the water supply, and testing. Sealing is an important step and should be done after the bowl and base are in place and the wax ring is secure. Use silicone caulk to seal the perimeter of the base, especially in the corners and where the base meets the floor. This will ensure the new toilet is secure and free from leaks.
Once sealed, the next step is to connect the water supply to the new toilet. Start by turning off the water supply for the toilet and disconnecting the old toilet’s water supply tube. Then connect the new toilet’s water supply tube to the water supply line and secure the connection with a coupling nut. Once that is finished, you can turn the water supply back on and check for any potential leaks.
The final step is to test the new toilet. Flush the toilet multiple times to make sure it is working properly. Check for any leaks around the base and water supply connection. Finally, check the bowl water level and make sure it is set to the correct height. With your new toilet now installed, your bathroom is ready for use.
